PRODUCTS
S02860
The UL Ti MATE 80, 20W LED is a “through- hull” submersible marine light rated IP68 to 10 bar. The light is suitable for small boats and can be installed into GRP-fiberglass and wooden hulls.
It must be installed below the minimum waterline.
The boat must be hauled out for installation, although maintenance of the LED is carried out from inside the hull.
The LEDs are available in blue, red, green or white.
The LED driver is fitted in an IP66 enclosure and is mounted remotely.
| Lamp Type | 7 x single 110 lumen LED |
| Lamp Life | 30,000 Hours - Colour Temp - 7000K |
| Voltage / Amps | 12vdc/1.6 A - 24vdc/0.8 A |
| Glass Lens | Borosilicate glass |
| Classification | Lloyds Approved |
| Material | Aluminium Bronze and 770 ALU |
| Light Output | 3,500 Lumens |
Diagrams (Click to enlarge.)
Installation Instruction
- The hole cut-out should be 61 mm.
- Hull thickness range 12-65mm
- Recommended distance between lights 1 to 2meters.
Electrical Information
- See diagram above.
- Note do not connect the power cables to the dim terminals.
- Remove bridge wire when dimming is required.