PRODUCTS

S02655

This ”through-hull” submersible marine light IPX8 rated to 10 bar, is suitable for smaller boats.

The light is used into GRP-fibreglass and wooden hulls and must be installed below the minimum waterline.

The boat must be hauled out for installation, although maintenance is carried out from inside the hull.

This UL Ti MATE 80 uses a 100w halogen lamp and runs on 12 or 24 VDC.

S02655

Download Brochure

Technical Specification

Lamp Type100W Halogen
Lamp Life2000 Hours - Colour Temp - 3000 K
Voltage / Amps12VDC/8.3A - 24VDC/4.2.A
Glass LensBorosilicate glass
ClassificationLloyds Approved
MaterialAluminium Bronze and 770 ALU
Light Output750 Lumens

Diagrams (Click to enlarge.)

S02655 - Technical Diagram 01

 

Installation Instruction

  • The hole cut-out should be 61 mm.
  • Hull thickness range 12-65mm
  • Recommended distance between lights 1 to 2 meters

Electrical Information

  • Recommend only 2 lights for each power supply cable.