PRODUCTS
S02652-XT
In response to customer demand we have designed a new extended version of the UL Ti MATE 80. The length of the light barrel has been increased, so the maximum hull thickness is now 110mm instead of 65mm.
The light is suitable for installation into GRP-fibreglass and wooden hulls and must be installed below the minimum waterline. The boat must be hauled out for installation, although maintenance is carried out from inside the hull.
The light has a sealed integral igniter which makes it safer, and allows the ballast to be located away from the bilge area.
The latest UL Ti MATE 80 can also be fitted with a wide beam lens as shown in picture.
| Lamp Type | Xenon bulb |
| Lamp Life | 3000 Hours - Colour Temp - 7000 K |
| Voltage / Amps | 12VDC/6.4A - 24VDC/2.5.A |
| Glass Lens | Borosilicate glass |
| Classification | Lloyds Approved |
| Material | Aluminium Bronze and 5083 ALU |
| Light Output | 4,800 Lumens |
Diagrams (Click to enlarge.)
Installation Instruction
- The hole cut-out should be 61 mm.
- Hull thickness range 65-110mm
- Recommended distance between lights 1 to 2 meters
Electrical Information
- Recommend only 2 lights for each power supply cable.
- See wiring diagram on opposite page.