PRODUCTS

S00330 75 SA 150

This is a “through-hull” submersible marine light for welding into aluminium and steel hulls. Maintenance of the light is carried out from inside the hull.

Our patent pending internal SA ( Super Adjustable) unit allows the beam angle to be varied from a narrow to wide beam, and to universally move the beam direction by 20 degrees from within the projector housing. We advise that the light be installed 250mm below the minimum waterline when the yacht is loaded with 50% fuel and 50% water, and that the light be angled 15 degrees downwards. To achieve this there are 3 models- Flush, 30 degree and 50 degree.

The UL Ti MATE 75 SA has a larger aperture which increases the light output by 25%. The stainless steel model comes as standard with Ice Class Lloyds Approval and has been pressurised to 80 bar.

The aluminium model is IPX8 to 10 bar.

S00330 75 SA 150

Download Brochure

Technical Specification

UL Ti MATE 75 and 130 SA - Spherical Adjustment Unit UL Ti MATE 75 and 130 SA - Spherical Adjustment Unit

UL Ti MATE 75-SA - Common Parts Animation and Title UL Ti MATE 75-SA - Common Parts Animation and Title

Lamp TypeMSD Metal Halide 150w
Lamp Life3000 Hours - Colour Temp - 7000 K
Voltage / Amps150 watt 120(V3)/230(V2) - 1.4/0.7.A
Ballast150 watt electronic in IP 65 Enclosure
Glass LensBorosilicate glass
ClassificationLloyds Approved
MaterialSteel and 5083 ALU
Light Output150w 12,000 Lumens

Diagrams (Click to enlarge.)

S00330 75 SA 150 - Technical Diagram 01 S00330 75 SA 150 - Technical Diagram 02 S00330 75 SA 150 - Technical Diagram 03

 

Installation Instruction

  • The hole cut-out should be cut to suit the insert angle.
  • Maximum hull plate thickness should be 12mm for the flush and 20mm for the 30 & 50 degree.
  • For Lamp Maintenance allow 170mm behind the cable gland.

Electrical Information

  • 150w - Recommended maximum distance between ballast and projector 10m.
  • Cable - High temp. silicone 3 core (Part No S00111).